Part E - Section 3 - Non-Residential Development in Residential Zones
3.1INTRODUCTION
Non-residential development in residential zones generally comprises, but is not limited to, the following types of uses:
- •Early education and care centres;
- •Educational establishments;
- •Information and education facilities;
- •Health care facilities (including health consulting rooms, medical centres and hospitals);
- •Places of worship;
- •Community facilities;
- •Neighbourhood shops; and
- •Entertainment facilities.
There are also some instances, where non-residential development occurs within residential zones that operate pursuant to existing use rights (refer to Division 4.11 of the EP&A Act) or are a permissible use pursuant to cl.2.5 and Schedule 1 – Additional Permitted Uses to NSLEP 2013.
The majority of these uses are primarily operated from large scale buildings which are often inconsistent with the scale of residential development occurring within the residential zones. They can also lead to additional impacts on residential amenity in terms of traffic impacts and noise.
The purpose of this Section of the DCP is to provide guidance to applicants for the development of non-residential development in residential zones such that the impacts on residential amenity is minimised.
3.1.1General Objectives
The general objectives of this Section of the DCP are to ensure that non-residential development in residential zones:
- 01is consistent with the principles contained within the Integrated Land Use and Transport Policy;
- 02does not have adverse impacts on residential amenity or environmental quality;
- 03is in context with surrounding development with regards to its bulk and scale;
- 04contributes to the garden setting and lower scale character of North Sydney's residential neighbourhoods; and
- 05is consistent with the character that is described in the relevant Planning Area Character Statements and Locality Area provisions.
3.1.2When does this section of the DCP apply?
This Section of the DCP applies to:
- a)all development, other than all forms of residential accommodation, on land within the R2 Low Density Residential, R3 Medium Density Residential, R4 High Density Residential and C4 Environmental Living zones.
- b)all development, other than all forms of residential accommodation, on land zoned SP2 Infrastructure, and where any adjacent or adjoining land is zoned:
- i)R2 Low Density Residential,
- ii)R3 Medium Density Residential,
- iii)R4 High Density Residential, or
- iv)C4 Environmental Living.
- i)
If land zoned SP2 Infrastructure is located adjacent to one or more than the following zones:
- a)R2 Low Density Residential,
- b)R3 Medium Density Residential,
- c)R4 High Density Residential, or
- d)C4 Environmental Living.
then the controls of the most restrictive zone will apply to the subject site. For example, if the subject site is located adjacent to land zoned R2 Low Density Residential and R4 High Density Residential, then the provisions of the R2 Low Density Residential would apply.
3.2QUALITY BUILT FORM
In response to their local context, buildings need to be designed to respect the existing topography and relate to the rhythm and pattern of characteristic buildings in the prevailing streetscape. A comfortable and memorable street will be one where no one building or feature dominates.
Kerb and guttering, footpaths, fences, front gardens and the street frontage of buildings all contribute to the appearance of a street and influence how people feel in them and about them. Streets where people feel comfortable will exhibit consistency in these elements and relationships between the scale of these elements.
3.2.1Streetscape
Objectives
- O1To ensure that footpaths, kerb and guttering and street trees contribute to a consistent streetscape.
Provisions
- P1All works within the road reserve must be undertaken in accordance with the North Sydney Council Performance Guide (refer to Part D: Section 7 – Public Infrastructure of the DCP).
- P2All existing sandstone kerb and guttering must be retained and maintained.
- P3Existing street trees are to be retained and protected by avoiding excavation or building within the drip line of the tree.
- P4Plant new trees of the same species that are present in the street, or in accordance with guidelines or strategies adopted by Council.
- P5Maintain a nature strip on-street if one exists.
3.2.2Laneways
Objectives
- O1To ensure that laneways are functional, attractive, safe and comfortable places for use by residents as part of their public space and pedestrian network.
Provisions
- P1The height of buildings facing laneways should respect the width of the lane (i.e. a one storey building generally provides the most appropriate scale).
- P2Where car parking is only capable of being located at the boundary to the laneway, only open car spaces or carports will be permitted (i.e. roller doors are not permitted).
- P3No more than 50% of the width of a laneway frontage may be allocated for car accommodation of any kind, or car park entrances.
- P4Laneway fences are to be softened by planting trees and shrubs that hang over or through fences.
- P5Existing trees on land that abut the laneway should be retained.
- P6All new and rebuilt fences and structures (including car parking spaces) must be setback at least 1.2m from the laneway frontage. This setback is to be landscaped with appropriate low maintenance plants.
3.2.3Subdivision pattern
Objectives
- O1To ensure that the characteristic subdivision pattern remains apparent, even if lots are subdivided or amalgamated.
Provisions
- P1Design and locate buildings to reinforce the characteristic subdivision pattern in the neighbourhood.
- P2Break down the bulk of larger buildings, where lots have been amalgamated, with bays or indents on the original building line.
3.2.4Siting
Objectives
- O1To maintain the characteristic building orientation and siting.
Provisions
- P1Buildings are to be sited in accordance with that described in the relevant Planning Area Character Statement or locality Area provisions (refer to Part F of the DCP), or if not identified for the relevant Planning or Locality Area, sited to relate to neighbouring buildings.
- P2Site buildings within a single building form, addressing the street.
- P3Orient each external wall parallel to the corresponding boundary of the site, unless another orientation is characteristic.
3.2.5Setbacks
Objectives
- O1To reinforce the characteristic pattern of setbacks and building orientation within the street.
- O2To control the bulk and scale of buildings.
- O3To provide separation between buildings.
- O4To preserve the amenity of existing dwellings and provide amenity to new dwellings in terms of shadowing, privacy, views, ventilation and solar access.
Front
Provisions
- P1The front setback must match the alignment of the primary facades of buildings on adjoining properties. Where different setbacks occur, the average of the setbacks of those primary facades is to be used.
- P2An increased setback may be required where there is a need to reduce the visual dominance of a large scale premises through the incorporation of landscaping or other screening and design treatments.
Side
Provisions
- P3Building setbacks are to comply with the requirements set out in Table E-3.1.
