Part E - Section 1 - Residential

1.1INTRODUCTION

1.1.1General Objectives

The general objectives of this Section of the DCP are to ensure that residential development:

  1. 01
    reinforces the local planning priorities and actions of Council's Local Strategic Planning Statement;
  2. 02
    reinforces the actions and targets of Council's Local Housing Strategy;
  3. 03
    is consistent with the principles contained within the Integrated Land Use and Transport Policy;
  4. 04
    provides a range of living opportunities that attract and cater for a diverse population;
  5. 05
    does not have significant adverse impacts on residential amenity or environmental quality;
  6. 06
    is in context with surrounding development;
  7. 07
    contributes to the garden setting, scale and character of North Sydney's residential neighbourhoods;
  8. 08
    provides safe and comfortable accommodation;
  9. 09
    is consistent with the desired character that is described in the relevant Planning Area Character Statements and Locality Area provisions;
  10. 010
    incorporates innovative sustainable design to reduce energy and water consumption, and meets or exceeds sustainability requirements, and
  11. 011
    minimise stormwater runoff, maintain or improve stormwater quality and encourage recycling where possible.

1.1.2When does this section of the DCP apply?

This Section of the DCP applies to all development applications for all forms of residential accommodation, including residential components of mixed use development.

1.2SOCIAL AMENITY

A diversity of people contributes to the popularity of an area. Diversity also extends the usefulness of an area and contributes to the sustainability of both community and the environment. A range of residential accommodation in terms of built form, tenure and affordability is needed to sustain a diverse population and to ensure that a range of services and facilities continues to be provided in the area. Council aims to maintain the existing diverse mix of residential accommodation in North Sydney, not lose this residential mix to other land uses and to allow for some increase in both the dwelling stock and population, in accordance with the NSW State Government policy of urban consolidation.

The aim of urban consolidation is to accommodate a certain proportion of Sydney's residential growth within existing urban areas. To implement urban consolidation in North Sydney, Council has identified areas where growth can be accommodated in a range of dwelling types including attached dwellings, dual occupancies, dwelling houses, multi dwelling housing and residential flat buildings. Additional living space can also be created through alterations and additions to existing dwellings and residential growth the mixed-use areas.

1.2.1Population Mix

Objectives
  1. 01
    To provide a mixed residential population in terms of age, gender, household type and size, education, income and employment, and including households with children, households on low to moderate incomes, households with aged or disabled persons.
  2. 02
    To ensure that dwelling yield achieves a density that contributes to energy efficient design and residential amenity.
Provisions
  1. P1
    Multi-dwelling housing and residential flat buildings containing less than 20 dwellings must include, at least two of the following dwelling types:
    1. a)
      studio;
    2. b)
      1-bedroom;
    3. c)
      2-bedroom; and
    4. d)
      3-bedroom.
  2. P2
    Despite P1 above, no more than 55% of all dwellings must comprise a combination of both studio and 1-bedroom dwellings.
  3. P3
    Residential flat buildings containing 20 or more dwellings should provide a mix of dwelling sizes in accordance with Table E-1.1.
    TABLE E-1.1: Dwelling Mix
    Dwelling Size% of Total Dwellings
    Studio10-20%
    1 bedroom25-35%
    2 bedroom35-45%
    3 bedroom+10-20%
  4. P4
    Variations to the dwelling mix within P2 or P3 will not be considered, unless the applicant can adequately demonstrate by an authoritative analysis of current and future market demand that the suggested mix is not reasonable.

1.2.2Universal Design and Adaptable Housing

Objectives
  1. 01
    To encourage the incorporation of universal design features and the provision of adaptable housing in new developments to meet the diverse needs of a variety of occupants.
  2. 02
    To encourage greater housing choice for seniors, families and people with disabilities.
  3. 03
    To enable residents to age in place.
Provisions
  1. P1
    All new dwellings must satisfy the Silver level performance requirements of the Livable Housing Design Guidelines. The incorporation of Gold and Platinum level universal design features is strongly supported.footnote:This provision applies to residential development which requires development approval and does not apply to alterations and additions to existing homes or complying development under NSW State Codes.
  2. P2
    A minimum of 20% of dwellings in multi-dwelling housing, residential flat buildings and shop top housing that contain more than 5 dwellings must comprise adaptable housingfootnote:Adaptable housing is designed with accessible features that can be modified to meet changing needs of residents over time. Typical adaptable features include level and wider doorways and corridors, slip resistant floor surfaces, reachable power points, lever door handles and lever taps. When designing adaptable housing consult AS 1428, 4299 and 4586..
  3. P3
    Where universally designed and adaptable dwellings are proposed, those dwellings must be clearly identified as such on the submitted development application plans.
  4. P4
    Developments requiring adaptable housing must also satisfy the provisions of Part D: Section 3 - Accessibility of this DCP.

1.2.3Maintaining residential accommodation

Objectives
  1. 01
    To ensure that developments do not result in the loss of residential accommodation.
Provisions
  1. P1
    Development, whether it comprises new buildings or alterations/additions to existing buildings, should ensure that the existing residential density on site is not reduced (i.e. that the number of dwellings, or the number of rooms/bed spaces in a boarding house, that existed on the site is not reduced).

1.3QUALITY BUILT FORM

In response to their local context, buildings need to be designed to respect the existing topography and relate to the rhythm and pattern of characteristic buildings in the prevailing streetscape. A comfortable and memorable street will be one where no one building or feature dominates.

Kerb and guttering, footpaths, fences, front gardens and the street frontage of buildings all contribute to the appearance of a street and influence how people feel in them and about them. Streets where people feel comfortable will exhibit consistency in these elements and relationships between the scale of these elements.

1.3.1Subdivision pattern

Objectives
  1. 01
    To ensure that the characteristic subdivision pattern remains apparent in the siting and design of new buildings, even if lots are subdivided or amalgamated.
Provisions
  1. P1
    Design and locate buildings to reinforce the characteristic subdivision pattern in the neighbourhood (i.e. walls of buildings are generally built parallel to the property boundaries).
  2. P2
    Where lots have been amalgamated, the bulk of larger buildings must be articulated through the use of bays or indents on the original lot line.

1.3.2Streetscape

Objectives
  1. 01
    To ensure that footpaths, kerb and guttering and street trees contribute to a consistent streetscape.
Provisions
  1. P1
    All works within the road reserve must be undertaken in accordance with the North Sydney Council Performance Guide (refer to Part D: Section 7 - Public Infrastructure of the DCP).
  2. P2
    All existing sandstone kerb and guttering must be retained and maintained.
  3. P3
    Existing street trees are to be retained and protected by avoiding excavation or building within the drip line of the tree (refer to Part B: Section 3.1 - Tree and Vegetation Management of the DCP).
  4. P4
    Plant new trees of the same species that are present in the street, or in accordance with guidelines or strategies adopted by Council.
  5. P5
    Maintain a nature strip on-street if one exists.

1.3.3Laneways

Objectives
  1. 01
    To ensure that laneways are functional, attractive, safe and comfortable places for use by residents as part of their public space and pedestrian network.
Provisions
  1. P1
    Where a laneway is the principal frontage to a property, dwellings are to address the lane (i.e. do not conceal the front façade of such buildings behind high walls, fences or garages).
  2. P2
    The height of buildings facing laneways should respect the width of the lane (i.e. a 1-storey building generally provides the most appropriate scale). A 2-storey building ancillary to the main dwelling may be permitted adjacent to the laneway, but only if:
    1. a)
      the laneway does not comprise the site's primary frontage; and
    2. b)
      the building does not result in any adverse impacts in terms of visual and acoustic privacy, overshadowing, heritage and an area's character.
  3. P3
    Where a site has a sole frontage to a laneway, any 2-storey component of a building must be set back at least 10m from the laneway boundary.
  4. P4
    Dwellings addressing laneways are to be provided with a reasonable level of privacy through design and landscaping (e.g. the use of obscure glazing and medium height shrubs that partially obscure windows).