Part D - Development Elements
PREFACE
Part D of the DCP contains objectives and development control provisions for elements of development that are common to different types of development.
The degree of relevance of each of these provisions varies between different types of development and different locations which needs to be taken into consideration.
Part D of the DCP comprises the following sections:
| Section 1: | Subdivision |
| Section 2: | Landscaping |
| Section 3: | Accessibility |
| Section 4: | Car Parking and Transport |
| Section 5: | Waste Minimisation and Management |
| Section 6: | Safety and Security |
| Section 7: | Public Infrastructure |
| Section 8: | Construction Management |
| Section 9: | Late Night Trading Hours |
SECTION 1SUBDIVISION
1.1SUBDIVISION PATTERN
- O1To ensure that the characteristic subdivision pattern remains apparent, even if lots are subdivided or amalgamated.
- P1Maintain lot sizes, shape and orientation identified in the relevant Planning Area Character Statement or Locality Area provisions (refer to Part F of the DCP), or if not identified in the relevant Planning or Locality Area, that are characteristic of the area.
1.2SERVICING OF NEW LOTS
- O1To ensure new lots are adequately serviced.
- P1Applicant's must demonstrate how the site is to be serviced for gas, water, electricity, drainage, sewerage, telephone and storm water removal, including any easements that need to be created and practical access for long term maintenance.
- P2All new allotments must provide gravity drainage to the nearest street gutter or inter-allotment drainage system.
1.3SITE CONSOLIDATION IN COMMERCIAL DEVELOPMENT
- O1To enable the creation of a human scale that also reflects a consistent subdivision pattern.
- O2To enable the creation of suitably sized commercial floor plates that can be tenanted easily.
- P1Amalgamate lots to achieve lot frontage identified in the relevant Planning Area Character Statement or Locality Area provisions (refer to Part F of the DCP).
SECTION 2LANDSCAPING
2.1GENERAL PROVISIONS
Objectives
- O1Landscaping and planting satisfies minimum performance standards and is sustainable and appropriate to the site.
- O2Landscaping should not adversely impact upon the amenity and usability of adjoining properties.
- O3To encourage biodiversity conservation and ecological processes.
- O4To provide a buffer between bushland and development.
Provisions
- P1Development must provide the minimum landscaped area as specified within Part E – Development Types of this DCP (in particular Sections 1.4.7 and 3.3.5), or any alternative minimum landscaped area requirement specified within Part F – Area Character Outcomes of this DCP.
- P2Retain existing trees and mature vegetation wherever practical.
- P3Development on properties in proximity to bushland must be consistent with the requirements of Section 3.2 - Bushland to Part B of this DCP.
- P4Where a development proposes to incorporate plant containers, they should have a minimum diameter of 110mm and a minimum depth of 135mm.
- P5Developments should incorporate locally occurring native species to reduce water and fertiliser requirements.
- P6Achievement of maximum density, pursuant to Council's controls, will be subject to retention of significant trees (as identified by Council) and other important topographic features.
- P7Minimise disturbance of natural ground levels, native vegetation and topography in the vicinity of identified significant trees.
- P8New hedges must not result in the unreasonable reduction of access to sunlight or views. A condition may be imposed on a development consent which may restrict the maximum height of a hedge.
- P9Trees should provide at least 50% canopy cover over landscaped areas at maturity.
- P10Plant the largest growing and longest lived tree species appropriate to the site conditions.
- P11Council encourages the incorporation of green walls into developments where appropriate.
- P12Avoid creating landscaped areas that are broken into a series of small fragmented unusable areas.
- P13Establish a significant landscaped setting for pathways and paved areas.
- P14Use planting to create a buffer against cold winter winds (generally westerly), or to direct cooling breezes in summer (generally north easterly).
- P15Locate driveways and pathways at least 500mm from common boundaries.
- P16Provide screen planting, including trees, within the 1.5m setback from the common boundary.
- P17Identify what measures are to be implemented during construction to protect existing vegetation being retained (refer to Part B: Section 3.1.4 – Protection of Trees During Construction in the DCP).
- P18Avoid works which are to occur within the drip line of any tree that has a height greater than 6m, or a girth greater than 1m, measured 1m above the base of the tree.
- P19Vegetation and landscape elements should be selected and designed to avoid overshadowing existing solar panels or roof spaces which are capable of accommodating solar panels.
- P20Use pervious materials or stepping stones where pathways are incorporated within side setbacks.
2.2FRONT GARDENS IN RESIDENTIAL ZONES
Objectives
- O1To maximise water infiltration on a site.
- O2To soften the built form.
Provisions
- P1The entire front setback must not be paved or concreted.
- P2Where car parking and driveways are located in the front yard, use the minimum amount of paving as practicable.
- P3Front gardens should merge with those on adjoining properties and support the landscape character of the area.
- P4Plant trees and shrubs that will hang over or through fences.
- P5Complement the existing landscape character of the street, including street planting undertaken through the North Sydney Street Tree Strategy.
- P6Design front gardens that will soften and complement the view of buildings from the street and surrounding properties.
- P7Do not provide medium height, dense planting around building entries.
2.3NEW TREE PLANTING
Objectives
- O1To ensure that the current level of canopy cover in North Sydney is maintained and enhanced over the long term.
- O2To ensure that sustained amenity is achieved by establishing a range of age classes within the urban tree population.
- O3To ensure a species diversity that maintains or enhances the current urban character of North Sydney.
- O4To enhance biodiversity through the strategic connectivity of canopy and habitat plantings between areas of bushland remnants (i.e. wildlife corridor creation).
Provisions
Species Selection
- P1Species should be chosen after carefully evaluating the site constraints and the desired function of the tree (e.g. habitat, shade, safety, privacy and aesthetics).
- P2When planting is to take place on public land, Council's arborists will advise the appropriate species in accordance with the North Sydney Street Tree Strategy.
- P3When planting is to take place in bushland or bushland habitat areas, Council's Bushland Management Staff will determine appropriate species in accordance with the North Sydney Natural Area Survey 2010 and relevant Bushland Rehabilitation Plans.
- P4When planting on private property Council strongly recommends the use of a qualified arborist when selecting species.
- P5When selecting a species, the physical, ecological and horticultural characteristics should be considered.
- a)Physical characteristics include: mature dimensions (incl. height, spread and trunk diameter) foliage density, evergreen or deciduous and tree shape or form.
- b)Ecological characteristics include: climatic durability, water efficiency, fauna habitat and invasivity in bushland.
- c)Horticultural considerations include: fruit/flower/seed drop, suitability to the site growing conditions, poisonous or allergic qualities, weed potential, suckering, root vigour, structural soundness and longevity in the urban environment.
- a)
